Heavy tungsten bucking bars
New to choosing a bar? See how to choose a bucking bar and bucking bar shapes explained, compare every bar on the size and weight chart, match a competitor part on the cross-reference, or get a recommendation from the Bucking Bar Selector.
-
Tungsten Bucking Bar ETBB05 (Straight, 5.65 lb)
The ETBB05 is a straight tungsten bucking bar for backing solid rivets on flat skin and open structure. At 5.65 lb and 4 by 1.5 by 1.5 inches it packs the bucking mass of a much larger steel bar into a compact block, so shop heads form clean with less shock to your hand. Request a quote for current pricing and lead time.
When this bar wears out, the tungsten still holds value: return it and the weight becomes a recovery credit toward your next order through our Buyback program.
Request a Quote -
Tungsten Bucking Bar ETBB08 (Offset, 6.0 lb)
The ETBB08 is an offset Z-crank tungsten bucking bar for backing rivets set beyond a double step a flat bar cannot clear. At 6.0 lb and 6 x 1.5 x 1.5 inches, it brings the backing mass of a much larger steel bar to the rivet, so shop heads form clean with less shock to your hand. Request a quote for current pricing and lead time.
When this bar wears out, the tungsten still holds value: return it and the weight becomes a recovery credit toward your next order through our Buyback program.
Request a Quote -
Tungsten Bucking Bar ETBB10 (Straight, 3.85 lb)
The ETBB10 is a long reach tungsten bucking bar for backing rivets deep inside wings, spars, and box structure. At 3.85 lb and 7.1 x 1.625 x 1.625 inches, it brings the backing mass of a much larger steel bar to the rivet, so shop heads form clean with less shock to your hand. Request a quote for current pricing and lead time.
When this bar wears out, the tungsten still holds value: return it and the weight becomes a recovery credit toward your next order through our Buyback program.
Request a Quote -
Tungsten Bucking Bar ETBB24 (Offset, 4.05 lb)
The ETBB24 is a reach tungsten bucking bar for backing rivets inside tubes, sockets, and deep recesses a block bar cannot enter. At 4.05 lb and 8.625 x 2.5 x 1.5 inches, it brings the backing mass of a much larger steel bar to the rivet, so shop heads form clean with less shock to your hand. Request a quote for current pricing and lead time.
When this bar wears out, the tungsten still holds value: return it and the weight becomes a recovery credit toward your next order through our Buyback program.
Request a Quote -
Tungsten Bucking Bar ETBB25 (Offset, 3.15 lb)
The ETBB25 is a contoured tungsten bucking bar for backing rivets in sockets and corners that need mass on a small, shaped face. At 3.15 lb and 3 x 1.75 x 1.438 inches, it brings the backing mass of a much larger steel bar to the rivet, so shop heads form clean with less shock to your hand. Request a quote for current pricing and lead time.
When this bar wears out, the tungsten still holds value: return it and the weight becomes a recovery credit toward your next order through our Buyback program.
Request a Quote -
Tungsten Bucking Bar ETBB28 (Low-Profile, 3.15 lb)
The ETBB28 is a low-profile saddle tungsten bucking bar for backing rivets along a raised bead, tube, or curved feature. At 3.15 lb and 4 x 1.625 x 0.938 inches, it brings the backing mass of a much larger steel bar to the rivet, so shop heads form clean with less shock to your hand. Request a quote for current pricing and lead time.
When this bar wears out, the tungsten still holds value: return it and the weight becomes a recovery credit toward your next order through our Buyback program.
Request a Quote -
Tungsten Bucking Bar ETBB33 (Hook, 8.25 lb)
The ETBB33 is a long hook tungsten bucking bar for reaching deep into channels and box structure to back rivets far from an open edge. At 8.25 lb and 11 x 2.75 x 1 inches, it brings the backing mass of a much larger steel bar to the rivet, so shop heads form clean with less shock to your hand. Request a quote for current pricing and lead time.
When this bar wears out, the tungsten still holds value: return it and the weight becomes a recovery credit toward your next order through our Buyback program.
Request a Quote -
Tungsten Bucking Bar ETBB35 (Straight, 3.1 lb)
The ETBB35 is a straight tungsten bucking bar for backing solid rivets on flat skin and open structure. At 3.1 lb and 3 by 1.25 by 1.25 inches it packs the bucking mass of a much larger steel bar into a compact block, so shop heads form clean with less shock to your hand. Request a quote for current pricing and lead time.
When this bar wears out, the tungsten still holds value: return it and the weight becomes a recovery credit toward your next order through our Buyback program.
Request a Quote -
Tungsten Bucking Bar ETBB37 (Hook, 5.75 lb)
The ETBB37 is a hook (L or shoe) tungsten bucking bar that reaches around edges and into channels a block bar cannot enter. At 5.75 lb and 5 by 1.5 by 1.5 inches it packs the bucking mass of a much larger steel bar into a compact block, so shop heads form clean with less shock to your hand. Request a quote for current pricing and lead time.
When this bar wears out, the tungsten still holds value: return it and the weight becomes a recovery credit toward your next order through our Buyback program.
Request a Quote -
Tungsten Bucking Bar ETBB40 (Low-Profile, 3.05 lb)
The ETBB40 is a contoured saddle tungsten bucking bar for backing rivets along a curved skin, tube, or bead that a flat bar cannot follow. At 3.75 x 1.875 x 1 inches and 3.05 lb, it brings the backing mass of a much larger steel bar to the rivet, so shop heads form clean with less shock to your hand. Request a quote for current pricing and lead time.
When this bar wears out, the tungsten still holds value: return it and the weight becomes a recovery credit toward your next order through our Buyback program.
Request a Quote -
Tungsten Bucking Bar ETBB41 (Angled, 3.25 lb)
The ETBB41 is an angled-face tungsten bucking bar for rivets in corners, flanges, and sloped structure where a square block cannot sit flat. At 3.25 lb and 4.1 by 1.8 by 0.87 inches it packs the bucking mass of a much larger steel bar into a compact block, so shop heads form clean with less shock to your hand. Request a quote for current pricing and lead time.
When this bar wears out, the tungsten still holds value: return it and the weight becomes a recovery credit toward your next order through our Buyback program.
Request a Quote -
Tungsten Bucking Bar ETBB42 (Hook, 5.15 lb)
The ETBB42 is a hook tungsten bucking bar for reaching around structure to back rivets a flat bar cannot reach behind. At 5.15 lb and 6.3 x 3.7 x 1 inches, it brings the backing mass of a much larger steel bar to the rivet, so shop heads form clean with less shock to your hand. Request a quote for current pricing and lead time.
When this bar wears out, the tungsten still holds value: return it and the weight becomes a recovery credit toward your next order through our Buyback program.
Request a Quote
Compare these bars
| SKU | Dimensions (L x W x H, in) | Weight (lb) | Shape | Weight class | Access | ATS equivalent |
|---|---|---|---|---|---|---|
| ETBB05 | 4 x 1.5 x 1.5 | 5.65 | Straight | Heavy (3–6 lb) | Open | |
| ETBB08 | 6 x 1.5 x 1.5 | 6.0 | Offset | Extra-Heavy (6 lb+) | Open | |
| ETBB10 | 7.1 x 1.625 x 1.625 | 3.85 | Straight | Heavy (3–6 lb) | Open | |
| ETBB24 | 8.625 x 2.5 x 1.5 | 4.05 | Offset | Heavy (3–6 lb) | Tight / Confined | |
| ETBB25 | 3 x 1.75 x 1.438 | 3.15 | Offset | Heavy (3–6 lb) | Open | |
| ETBB28 | 4 x 1.625 x 0.938 | 3.15 | Low-Profile | Heavy (3–6 lb) | Open | |
| ETBB33 | 11 x 2.75 x 1 | 8.25 | Hook | Extra-Heavy (6 lb+) | Open | |
| ETBB35 | 3 x 1.25 x 1.25 | 3.1 | Straight | Heavy (3–6 lb) | Open | |
| ETBB37 | 5 x 1.5 x 1.5 | 5.75 | Hook | Heavy (3–6 lb) | Edges & Flanges | |
| ETBB40 | 3.75 x 1.875 x 1 | 3.05 | Low-Profile | Heavy (3–6 lb) | Open | |
| ETBB41 | 4.1 x 1.8 x 0.87 | 3.25 | Angled | Heavy (3–6 lb) | Edges & Flanges | |
| ETBB42 | 6.3 x 3.7 x 1 | 5.15 | Hook | Heavy (3–6 lb) | Open | |
| ETBB46 | 6 x 1.1 x 1 | 4.2 | Straight | Heavy (3–6 lb) | Open | |
| ETBB47 | 5 x 2 x 2 | 5.05 | Offset | Heavy (3–6 lb) | Open | |
| ETBB48 | 3 x 2.2 x 1.1 | 3.25 | Offset | Heavy (3–6 lb) | Open | |
| ETBB49 | 6.5 x 2 x 0.9 | 4.2 | Angled | Heavy (3–6 lb) | Edges & Flanges | |
| ETBB50 | 5.5 x 2.5 x 0.9 | 3.85 | Offset | Heavy (3–6 lb) | Open |
Heavy tungsten bucking bars (3 lb and up) put maximum bucking mass behind larger rivets and thicker structure. More mass keeps the bar planted under the gun, forming full heads with less bounce, up to 8.25 lb. Request a quote.